+ Reply to Thread
Results 1 to 8 of 8

Thread: Help (Christchurch)

  1. #1
    Junior Member
    Join Date
    Jun 2010
    Location
    North Beach, Christchurch
    Posts
    3

    Default Help (Christchurch)

    Hi, long time reader, first time poster...
    Just wondering if there are currently any known issues with the Freeview transmission in CHCH at the moment?
    I've been using the same set-up (DSE G7503 Zinwell clone) for 2 years with no problems, now suddenly in the past week or so Im finding it difficult to view frist Prime/Maori and the minor channels, now all the TV-3 related channels - all breaking up to pixels and eventually just getting the dreaded "No Signal" box..the TVNZ channels however remain coming in at full strength..any thoughts?

  2. #2
    Member
    Join Date
    Nov 2007
    Location
    NZ
    Posts
    63

    Default

    I don't think there any current problems. Might want to check you aerial setup?

  3. #3
    Junior Member
    Join Date
    Jun 2010
    Location
    North Beach, Christchurch
    Posts
    3

    Default

    Hmm my thinking is going that way..oddly enough I am receiving the TV-3 family of channels again ok this evening, Prime, Maori etc still "No Signal"

  4. #4
    Member
    Join Date
    Nov 2007
    Location
    Hawkes bay
    Posts
    90

    Default

    no video senders next door?

  5. #5
    Junior Member
    Join Date
    Jun 2010
    Location
    North Beach, Christchurch
    Posts
    3

    Default

    not that I know of..neigbours have sky + massive flatscreen, on both sides.
    TV-3 channels are back to being pixelated this morning..cleared up long enough last night for me to watch "House"
    Prime/Maori etc remain "no signal" oh well..will have a closer look at the antenna after work.

  6. #6
    Member
    Join Date
    Sep 2008
    Location
    Waikuku, Canterbury
    Posts
    60

    Default

    i'm in waikuku, nth canterbury and am having no reception issues.

  7. #7
    Member
    Join Date
    May 2008
    Location
    Christchurch
    Posts
    94

    Default

    No problems out here in Dunsandel.
    Ready. Set. Fold for 44851!

  8. #8
    Senior Member kiwisteve's Avatar
    Join Date
    Nov 2007
    Location
    Kapiti Coast
    Posts
    707

    Default

    I have struck issues on just one mux up here too , often a faulty splitter , unterminated outlets in other rooms , and in one case being fed via the VCR first had a drastic effect on the BER , even though analogue MTS and Trackside looked ok , disconnect VCR and instant fix !!
    KDL40W4000

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts