PDA

View Full Version : Is the is just me or what??


paulw
10-04-2009, 08:41 PM
Tonite I turned on my Draco and went thru the channels and found some out of order. I did a rescan but the same. Even unplugged it for 30 minutes and did another rescan with the same results.

CHs 1,2,3,4,6,7, 8,20 are OK but 800 = Maori, 801 = Parliament, 802 = Test, 803 Chinese, 804 & 805 = res, 806 - FV HD test.

Is my STB on it's way out again as last time before the PSU died the reserved and test channels appeared on a step thru channel selection or have FV shuffled the channels??
openmedia
11-04-2009, 12:31 AM
Tonite I turned on my Draco and went thru the channels and found some out of order. I did a rescan but the same. Even unplugged it for 30 minutes and did another rescan with the same results.

CHs 1,2,3,4,6,7, 8,20 are OK but 800 = Maori, 801 = Parliament, 802 = Test, 803 Chinese, 804 & 805 = res, 806 - FV HD test.

Is my STB on it's way out again as last time before the PSU died the reserved and test channels appeared on a step thru channel selection or have FV shuffled the channels??

Power the STB off for a couple of hours and then do a re-scan.

I've just checked the DTT stream and they haven't changed any of the channel number information so it might just be a glitch.
paulw
12-04-2009, 07:23 PM
Thanx for the suggestion. I tried that today and turned the Draco off for 9 hours then did a rescan. Still the same. Doesn't worry me too much as the stations in the 800 range I don't usually watch..
wiredr
13-04-2009, 07:44 AM
check the Channel info for frequency the 800 channels will most probably be from another transmission tower on a different mux.
paulw
19-04-2009, 03:38 PM
As an update to this. I was watching the V8s on CH3 today and suddenly I got "Service Updateing" which I thought was strange as it doesn't have Freeview certified software installed, so I left it for about 30 minutes but it never changed. Restarted the Draco and all the channels were back to where they belonged except for some duplicates around CH 1007 ~ 1014 but they had no pix or sound . Weird..
Mr Qam
19-04-2009, 06:57 PM
Strange about the fact it chooses to load them as ch 800 onwards - other idtv's i have tested use ch 800 onwards to store non-freeview services.